❍ If paper is already loaded, remove it from the paper tray, fan it well, and tap it on a flat surface such as a desk to even the edges.
Check that the position of the paper guides and the front end guide match the paper size.
❍ To load 250 or more sheets of paper, first load about 200 sheets, and then load the remaining sheets, making sure that the paper does
not exceed the limit mark.
4. Re-attach the cover.
5. Push tray 2 (optional) gently in until it stops.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/acc/t0011.htm (2 of 3)2005/10/05 12:08:35
To Next Page
Loading...
