Troubleshooting > Printer Status Monitor Errors > Cover Open
Cover Open
A cover is open. Close the cover.
Close the top cover or duplex unit cover. If the cover is already closed, open and then reclose it.
Follow the procedure below to close the top cover or duplex unit cover.
1. Close the cover.
❍ Check that the duplex unit is correctly attached and the duplex unit cover is closed.
2. If the [Resume] key lights, press that key.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/acc/t0015.htm (1 of 2)2005/10/05 12:08:39
To Next Page
Loading...
