Additional Information > Guide to Components > Printer Rear
Printer Rear
1. USB slot
Connect the USB cable from the computer here.
2. Duplex unit cover button
Press to open the duplex unit cover.
3. Bypass tray
Insert paper by hand here. Insert thick paper and label paper.
4. Duplex unit locks
Use to lock or unlock the duplex unit when attaching or detaching it.
5. Duplex unit cover
Open to remove paper jammed inside the duplex unit.
6. Vent
Air is vented here to prevent the inside of the printer from getting too warm. Do not lean anything against the vent or block
it in any way. If the inside of the printer gets too warm, a breakdown could occur.
7. Guide board
Open to remove paper jammed inside the printer.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/acc/0157.htm (1 of 2)2005/10/05 12:09:06
To Next Page
Loading...
