CIP Training L5160/L5130
Basic Operation
Interrupt or Abort Printing
When you interrupt or abort ongoing printing jobs, perform the following operations.
1. Press the [Off Line/On Line] key during printing.
DWU105
Printing is interrupted.
2. Press [Resume] to resume printing or [Abort] to abort printing.
When pressing [Resume], the machine starts printing from the interrupted state.
• For details about operations for interrupting, resuming, and stopping using a computer, see
"Functions on the Main Menu", RIP Settings Guide.
• The regular print quality cannot be guaranteed if printing is restarted.
Cutting Media
This section explains how to cut roll media.
Roll up cut media with the roll-up unit so that the printing surface of the media does not touch
the floor or the printing surface of another piece of media.
1. Press [Origin Setting/Cut] on the bottom right of the screen.
2. Press [Cut].
3. Select the position from where to cut media from either [Base line position on the media
guide] or [Position of the cutter].
Select [Base line position on the media guide] to cut media at the base lines on the media
guides.
To Next Page
Loading...
