Ricoh L5160 - Page 7

CIP Training L5160/L5130
Basic Operation
4. Press [Print Test].
5. Press [Execute].
The result of the nozzle check is printed.
6. Check the printed result.
• For details about the printing result, see "How to Read the Printing Result ".
• If there are abnormalities, perform head cleaning. For details about
head cleaning, see "Cleaning Print Head Nozzles".
7. Press [End].
How to Read the Printing Result
How to read the test printing result is explained below.
DWT171
4567
1
2
3
1. Print head 1
2. Print head 2
3. Print head 3
4. Nozzle D column
5. Nozzle C column
6. Nozzle B column
7. Nozzle A column
Check the position of the print heads where discharge defects such as clogging nozzles in
the nozzle check pattern have occurred. Check the print heads with discharge defects by
referring to the following illustration.