Operation
14
1
Note
❒ Up to 9999 prints can be en-
tered at one time.
❒ To change the number en-
tered, press the {
{{
{Clear/Stop}
}}
}
key and enter the new num-
ber.
C Press the {
{{
{Start}
}}
} key.
Printing starts automatically af-
ter trial print is delivered.
Note
❒ After printing is completed,
the same number of prints is
automatically set for the next
job.
❒ To stop the machine during
the multi-print run, press the
{
{{
{Clear/Stop}
}}
} key. See p.24
“Stopping a Multi-print
Run”.
❒ To return the machine to the
initial condition after print-
ing, press the {
{{
{Clear
Modes/Energy Saver}
}}
} key.
When Auto Cycle is off
A Make sure that Auto Cycle
mode is not selected.
B Press the {
{{
{Start}
}}
} key.
A trial print is delivered to the
paper delivery tray.
C Press the {
{{
{Proof}
}}
} key and check
the image density and the im-
age position of the proof print.
PinkGold-F_V4_FM.book Page 14 Tuesday, May 27, 2003 3:33 PM
To Next Page
Loading...
