Ricoh LD316D - Control Panel

9
Control Panel
Note
❒ These illustrations show Type 2.
1. {Copy} key
Press to activate the copier function.
2. Indicators
Display errors and machine status.
• h: Error indicator
See “Control Panel”, General Settings
Guide.
• D: Add Toner indicator
See p.48 “D Adding Toner”.
• B: Load Paper indicator
See p.45 “B Loading Paper”.
3. Display
Displays operation status and messages.
4. Selection keys
Correspond to items on the display. Press
to select the corresponding item.
5. Scroll keys
Press to select an item.
{U}: scroll upward
{T}: scroll downward
{V}: scroll right
{W}: scroll left
Reference
See p.11 “Reading the Display and
Using Keys”.
6. {User Tools/Counter} key
Press to change default or operation pa-
rameters according to requirement.
7. {Clear Modes} key
Press to clear the current settings.
8. {Clear/Stop} key
Clear: clears an entered numeric value.
Stop: stops copying.
9. Main power indicator
Lights when the main power switch is
turned on.
Reference
p.12 “Turning On the Power”
10. Operation switch (On indicator)
Press to turn the power on. The On indi-
cator lights. To turn the power off, press
again.
Note
❒ This key is inactivate during scanning
or while setting defaults.
Reference
p.12 “Turning On the Power”
11. {Duplex} key (Type 2 only)
Makes two-sided copies.
Reference
See p.34 “Duplex (Type 2 only)”.
12. {Combine/Series} key
Press to make combine or series copies.
Reference
p.36 “One-Sided Combine”
p.37 “Two-Sided Combine (Type 2
only)”
p.39 “Series Copies”
OK
Scanner
Printer
Copy
Combine/
Series
Duplex
Sort
Lighter Darker
Tex t
Photo
Original
ABC DEF
MNOJKLGHI
WXYTUV
OPER
PRS
ClearModes User Tools/Counter
Clear/Stop
Start
Enter
Escape
18
1
3
2
5
4
6 7 98 1
0
14
12 13 16 1915 17
11
APE029S
KirC3L_copy_F-EN_FM.book Page 9 Tuesday, November 1, 2005 12:12 PM