23
2. Copying
Basic Procedure
A If the machine has user codes set,
enter a user code (up to eight dig-
its) using the number keys, and
then press the {OK} or {#} key.
The machine is ready to copy.
Reference
For user codes, see “Key Opera-
tor Tools”, General Settings
Guide.
B Make sure "d Ready" appears on
the display.
❖ Initial copy display
If any other function is displayed,
press the {Copy} key.
C Make sure no previous settings
remain.
Note
❒ When there are previous set-
tings remaining, press the {Clear
Modes} key and enter again.
D Place your originals.
Reference
p.19 “Placing Originals”
E Make the necessary settings.
Reference
See the explanations for each
function.
F Enter the number of copies using
the number keys.
Note
❒ The maximum copy quantity
that can be set is 99.
G Press the {Start} key.
Copying starts.
Note
❒ Copies are delivered face down.
-How to operate
❖ To switch between pages or select
functions:
Press the scroll key.
❖ To stop the machine during a multi-
copy run:
Press the {Clear/Stop} key.
❖ To return the machine to the initial
condition after copying:
Press the {Clear Modes} key.
❖ To clear an entered value.
Press the {Clear/Stop} key.
KirC3L_copy_F-EN_FM.book Page 23 Tuesday, November 1, 2005 12:12 PM
To Next Page
Loading...
