Placing Originals
22
1
Placing regular size originals
A Select the paper tray using {U} or
{T} key, and then press the {#}
key.
B Select [Regular Size] using {U} or
{T} key, and then press the {OK}
key.
Note
❒ When [Auto Detect] is selected,
the size of the placed original
will be detected automatically.
C Select the paper size using the
scroll keys, and then press {OK}
key.
The “Programmed” message ap-
pears.
When the regular size originals
settings are registered,
appears on the top of copy display.
Note
❒ To cancel the size you have set,
press the {Clear Modes} key.
KirC3L_copy_F-EN_FM.book Page 22 Tuesday, November 1, 2005 12:12 PM
To Next Page
Loading...
