Ricoh LD316D - Copier Functions; Adjusting Image Density; Selecting Original Type Setting; Selecting Copy Paper

Copying
28
2
Copier Functions
Adjusting Image Density
You can adjust copy image density to
match your originals.
If you require darker or lighter cop-
ies, adjust image density accordingly.
A Press the {Lighter} or {Darker} key
to adjust the density.
Selecting Original Type
Setting
Select one of the following two types
to match your originals:
❖ Text
Select this when your originals
contain only text (no pictures).
❖ Photo
This can reproduce delicate tones
of photographs and pictures.
Reference
p.53 “Original Type Setting”
A Press the {Original} key and select
the original type.
Note
❒ Press the {Original} key to go
through the following types:
Selecting Copy Paper
There are two ways to select copy pa-
per:
❖ Auto Paper Select
The machine selects a suitable size
of copy paper automatically based
on original size and reproduction
ratio.
❖ Manual Paper Select
Choose the tray containing the pa-
per you want to copy onto: a paper
tray or the bypass tray.
Reference
p.18 “Sizes difficult to detect”
Note
❒ If you specify all paper trays as
containing special paper, you
cannot use the Auto Paper Se-
lect function.
T
P
Ori
g
Escape
APE031S
Lighter Darker
Upper indicator lit Text
Lower indicator lit Photo
OK
Darker
GHI
PRS
Escape
APE032S
Text
Photo
Original
KirC3L_copy_F-EN_FM.book Page 28 Tuesday, November 1, 2005 12:12 PM