Placing Originals
18
1
❖ ADF or ARDF
Note
❒ When you copy custom size originals, make sure you specify the size of the
originals. If not, the image may not be copied properly. See p.21 “Placing cus-
tom size originals”.
Sizes difficult to detect
It is difficult for the machine to detect the sizes of the following originals, so se-
lect the paper size manually.
• Originals with indexes, tags, or other projecting parts
• Transparent originals such as OHP transparencies or translucent paper
• Dark originals with lots of text and drawings
• Originals partially consisting of a solid image
• Originals that have solid images around their edges
Missing Image Area
Even if you place originals in the ADF or ARDF, or on the exposure glass cor-
rectly, 4 mm (0.2”) margins on all four sides might not be copied.
Maximum scanning area
KirC3L_copy_F-EN_FM.book Page 18 Tuesday, November 1, 2005 12:12 PM
To Next Page
Loading...
