Copier Functions
33
2
A Press the {Sort} key.
Note
❒ When canceling the Sort func-
tion, press the {Sort} key, and
make sure the {Sort} key indica-
tor is off.
B Select [Sort] or [Rotate Sort], and
then press the {OK} key.
C Enter the number of copy sets us-
ing the number keys.
D Place your originals.
Note
❒ When placing originals on the
exposure glass, start from the
first page to be copied. When
placing originals in the ADF or
ARDF, set the first page on top.
E Press the {Start} key.
Note
❒ When placing originals on the
exposure glass, press the {#} key
after all originals are scanned.
Changing the number of sets
You can change the number of copy
sets during copying.
Note
❒ This function can only be used
when the Sort function is selected.
A While “Copying...” is dis-
played, press the {Clear/Stop} key.
B Press [Sets].
C Enter the number of copy sets
with the number keys, and then
press [Resume].
Copying starts again.
Note
❒ The number of sets you can en-
ter differs depending on when
the {Clear/Stop} key is pressed.
Combine/
Series
Duplex
Lighter
APE033S
Sort
KirC3L_copy_F-EN_FM.book Page 33 Tuesday, November 1, 2005 12:12 PM
To Next Page
Loading...
