17
6.
Configuring the Network Interface
Board Using a Web Browser
Features
You can check the status of a machine and change its settings using the Web
browser.
❖ What can it do?
You can remotely check the status of a machine or specify its settings over the
network using a computer's Web browser.
The following functions are available with Web browser:
• Displaying machine status/settings
• Resetting network settings
• Making machine settings
❖ Configuring the machine
This requires TCP/IP to be installed. After the machine has been configured
to use TCP/IP, it will be possible to adjust settings using a Web browser.
Reference
For details about configuring the machine to use TCP/IP, see p.7 “Setting
Up the Machine on a Network”.
❖ Browser
Note
❒ If you are using a proxy server, change the Web browser settings. Consult
your network administrator about the settings.
❒ This machine information cannot be refreshed automatically. Click [Re-
load] or [Refresh] on the Web browser.
❖ Specifying the address
In the [ Address] box, enter the address (for example ht-
tp://XXX.XXX,XXX,XXX, where the Xs are the numbers of the IP address).
If the host name of the machine is registered on the DNS server or WINS serv-
er, you can enter it.
To Next Page
Loading...
Need help?
General
