Ricoh MP 2553 Series - Transmitting While Checking Connection to Destination (Immediate Transmission)

Transmitting while Checking Connection to
Destination (Immediate Transmission)
Using Immediate Transmission, you can send documents while checking the connection to the
destination.
You can specify fax or IP-Fax destinations.
If you specify Internet Fax, e-mail, folder destinations, and group or multiple destinations, the
transmission mode is automatically switched to Memory Transmission.
• It is recommended that you call the receivers and confirm with them when sending important
documents.
1. Display the initial facsimile screen.
•
When using the standard operation panel
Press the [Home] key on the top left of the control panel, and press the [Facsimile] icon on the
[Home] screen.
CXX002
• When using the Smart Operation Panel
Press the [Home] key on the top left of the control panel. Flick the screen to the left, and then
press the [Fax] icon on the Home screen 4.
2. Make sure "Ready" appears on the screen.
Transmitting while Checking Connection to Destination (Immediate Transmission)
95