Ricoh MP 3054 Series User Guide

3. Copy
This chapter describes frequently used copier functions and operations. For information not included in
this chapter, see Copy/ Document Server available on our website.
Basic Procedure
To make copies of originals, place them on the exposure glass or in the ADF.
When placing the original on the exposure glass, start with the first page to be copied. When placing
the original in the ADF, place them so that the first page is on the top.
(mainly Europe)
For details about placing the original on the exposure glass, see page 83 "Placing Originals on the
Exposure Glass (mainly Europe)".
(mainly Asia)
For details about placing the original on the exposure glass, see page 83 "Placing Originals on the
Exposure Glass (mainly Asia)".
(mainly North America)
For details about placing the original on the exposure glass, see page 84 "Placing Originals on the
Exposure Glass (mainly North America)".
For details about placing the original in the ADF, see page 85 "Placing Originals in the Auto Document
Feeder".
To copy onto paper other than plain paper, specify the paper type in User Tools according to the weight
of the paper you are using. For details, see "Tray Paper Settings", Connecting the Machine/ System
Settings.
1. Display the initial copy screen.
• When using the standard operation panel
Press the [Home] key on the top left of the control panel, and press the [Copier] icon on the
[Home] screen.
CXX002
87

Ricoh MP 3054 Series Specifications

General

Print Speed	30 ppm
Copy Resolution	600 x 600 dpi
Duplex Printing	Yes
Monthly Duty Cycle	50, 000 pages
Maximum Paper Size	A3
Warm-up Time	20 seconds
Memory	2 GB RAM
Scan Resolution	600 dpi
Paper Capacity	4, 700 sheets
Connectivity	USB 2.0, Ethernet 10/100Base-TX
Functions	Print, Copy, Scan
Scan Speed	80 ipm (simplex)
Control Panel	Touchscreen
First Print Speed	4.6 seconds
Hard Disk Drive	320 GB
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows, Mac, Linux
Print Resolution	Up to 1200 x 1200 dpi