Message Cause Solution
"Classification Code is
incorrect."
The classification code is not
supported with the printer
driver.
Select [Optional] for
classification code. For details
about how to specify
classification code settings, see
"Configuring Classification
Codes", Print.
"Duplex Cancelled" Duplex printing was canceled. • Select an appropriate
paper size for the duplex
function. For details about
paper, see "Specifications
for the Main Unit",
Maintenance and
Specifications.
•
Change the setting for
"Apply Duplex" in [Tray
Paper Settings] to enable
duplex printing for the
paper tray. For details
about setting "Apply
Duplex", see "Tray Paper
Settings", Connecting the
Machine/ System Settings.
"Exceeded Max. Pages
(Collate)"
The number of pages exceeds
the maximum number of sheets
that you can use Collate with.
Reduce the number of pages to
print.
"Exceeded the maximum
number of multi-sheet fold (Half
Fold)."
The maximum number of multi-
sheet folds (Half Fold) was
exceeded.
For details about the maximum
number of multi-sheet folds (Half
Fold), see "Fold", Print.
"Output Tray Changed"
The output tray was changed
because the paper size of the
specified output tray is limited.
Specify the proper output tray.
"Print Overrun" Images were discarded while
printing.
Select a lower resolution on the
printer driver. For details about
how to change the resolution
setting, see the printer driver
Help.
Messages Displayed When You Use the Printer Function
217
To Next Page
Loading...
Need help?
General
