Ricoh MP 3054 Series User Manual

Changing the Display Language
You can change the language used on the display. English is set as default.
1. Display the initial settings screen.
• When using the standard operation panel
Press the [User Tools/Counter] key.
CXX005
• When using the Smart Operation Panel
Press the [Home] key on the top left of the control panel. Flick the screen to the left, and then
press the [User Tools] icon ( ) on the Home screen 4.
2. Press language key until the language you want to display appears.
3. Close the initial settings screen.
• When using the standard operation panel
Press the [User Tools/Counter] key.
• When using the Smart Operation Panel
Press [User Tools/Counter] ( ) on the top right of the screen.
Changing the Display Language (When Using the Smart Operation Panel)
1. Press the [Home] key on the top left of the control panel. Flick the screen to the left, and
then press the Change Languages Widget on the Home screen 4.
2. Select the language you want to display.
3. Press [OK].
Changing the Display Language
61

Ricoh MP 3054 Series Specifications

General

Print Speed	30 ppm
Copy Resolution	600 x 600 dpi
Duplex Printing	Yes
Monthly Duty Cycle	50, 000 pages
Maximum Paper Size	A3
Warm-up Time	20 seconds
Memory	2 GB RAM
Scan Resolution	600 dpi
Paper Capacity	4, 700 sheets
Connectivity	USB 2.0, Ethernet 10/100Base-TX
Functions	Print, Copy, Scan
Scan Speed	80 ipm (simplex)
Control Panel	Touchscreen
First Print Speed	4.6 seconds
Hard Disk Drive	320 GB
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows, Mac, Linux
Print Resolution	Up to 1200 x 1200 dpi