Ricoh MP 3054 Series - Page 418

Start Guide
When Basic Authentication, Windows
❖
Authentication, LDAP Authentication, or
Integration Server Authentication is
active
Press [Login] on the top right on
the screen.
CZP134
Press [User Name].
CZP114
The soft keyboard is displayed on the
screen.
Enter a Login User Name, and
then press [Done].
Press [Password].
The soft keyboard is displayed on the
screen.
Enter a Login Password, and
then press [Done].
Press [Login].
Logging out from the machine
■
When User Code Authentication is
❖
active
Press [
] on the top right on
the screen.
CZP132
When Basic Authentication, Windows
❖
Authentication, LDAP Authentication,
or Integration Server Authentication is
active
Press [Logout] on the top right
on the screen.
CZP133
Press [OK].
If you can use the machine, you can say that

you are logged in. When you go out of the
operable state, you can say that you are
logged out.
If Basic Authentication, Windows

Authentication, LDAP Authentication, or
Integration Server Authentication is active,
the authentication screen appears on the
display. The machine only becomes operable
after entering your own Login User Name
and Login Password. If User Code
Authentication is active, you cannot use the
machine until you enter the User Code.
© 2013
Printed in Japan
EN US EN AU
D146-7563A
If there is no response when you touch the screen,
contact your service representative.