To Next PageTo Next PageWhat to do if error message is still displayed on Ricoh All in One Printer after removing misfed paper?
If an error message persists on your Ricoh All in One Printer even after removing misfed paper, it's likely that paper is still jammed in the tray. Remove the jammed paper by following the procedures displayed on the control panel.
Why does my Ricoh MP 501SPF All in One Printer frequently misfeed?
Frequent misfeeds in your Ricoh All in One Printer can be caused by using curled paper, which can also lead to soiled paper edges or slipped positions during stack printing. Here are some possible solutions: * Flatten the paper to straighten out the curl. * Load the paper upside down, so the curled edges face downward. * Place the cut paper on a flat surface to prevent curling, and do not lean it against the wall.
What to do if Ricoh MP 501SPF All in One Printer shows that an error has occurred?
If your Ricoh All in One Printer displays an error, it means a function in the [Check Status] screen has the status "Error Occurred" and is defective. Press [Check] in the function where the error occurred, read the displayed message, and take the appropriate action. You can use other functions normally.
What to do if error message is still displayed on Ricoh All in One Printer even if the indicated cover is closed?
If an error message is still displayed on your Ricoh All in One Printer even after closing the indicated cover, it means that one or more of the covers that are not indicated are still open. Make sure to close all the covers of the machine.
How to fix Ricoh MP 501SPF when it is unable to connect to the network?
If your Ricoh All in One Printer is unable to connect to the network, it may be due to a network error. Ensure the printer is correctly connected to the network and properly configured. If the issue persists, contact your administrator. If the indicator lamp remains lit after troubleshooting, contact your service representative.
Why are images printing on the reverse side of the paper on my Ricoh MP 501SPF All in One Printer?
If images are being printed on the reverse side of the paper with your Ricoh All in One Printer, you may have loaded the paper incorrectly. Ensure you load the paper correctly.
Why does only the [Copy] icon appear on the home screen of my Ricoh All in One Printer when turned on?
If, when your Ricoh All in One Printer is turned on, the only icon that appears on the home screen is the [Copy] icon, it means that functions other than the copier function are not yet ready. Wait a little longer.
Why won't my Ricoh All in One Printer enter Sleep mode when I press [Energy Saver]?
In some cases, the Ricoh All in One Printer does not enter Sleep mode when [Energy Saver] is pressed. Before you press [Energy Saver], check that Sleep mode can be enabled.
How to enable duplex printing on Ricoh MP 501SPF All in One Printer?
If you cannot print in duplex mode on your Ricoh All in One Printer, it's because you have selected a paper tray that is not set for duplex printing. Change the setting for "Apply Duplex" in "Tray Paper Settings" to enable duplex printing for the paper tray.
Why cannot I use Web Image Monitor to print documents stored in Document Server on my Ricoh MP 501SPF All in One Printer?
If you cannot use Web Image Monitor to print documents stored in Document Server on your Ricoh All in One Printer, it may be because print volume limits are specified, and users cannot print beyond their print volume limit. Print jobs selected by users who have reached their print volume limits will be canceled.
General| Print technology | Laser |
|---|---|
| Maximum resolution | 1200 x 1200 DPI |
| Economical printing | Yes |
| Time to first page (black, normal) | 6 s |
| Print speed (black, normal quality, A4/US Letter) | 50 ppm |
| Copier resize | 25 - 400 % |
| Maximum copy resolution | 600 x 600 DPI |
| Maximum number of copies | 999 copies |
| Scan to | E-mail, FTP, SMB |
| Scanner type | - |
| Scan speed (color) | 60 ppm |
| Faxing | Mono faxing |
| Fax memory | 4 MB |
| Modem speed | 33.6 Kbit/s |
| Fax resolution (black) | 200 x 200 DPI |
| Fax transmission speed | 2 sec/page |
| Printing colors | Black |
| Maximum duty cycle | - pages per month |
| Number of print cartridges | 1 |
| Page description languages | PCL 5e, PCL 6, PDF 1.2, PDF 1.3, PDF 1.4, PDF 1.5, PDF 1.6, PDF 1.7, PDF 1.7+ |
| Internal memory | 2048 MB |
| Processor frequency | 1460 MHz |
| Compatible memory cards | SD |
| Internal storage capacity | 320 GB |
| Display | LCD |
| Product color | Black, White |
| Display diagonal | 10.1 \ |
| Market positioning | Business |
| Cabling technology | 10/100/1000Base-T(X) |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Mobile printing technologies | Apple AirPrint |
| Supported network protocols (IPv4) | TCP/IP |
| Standard interfaces | Bluetooth, Ethernet |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 1500 W |
| Power consumption (average operating) | - W |
| Total input capacity | 600 sheets |
| Total output capacity | 500 sheets |
| Maximum input capacity | 2600 sheets |
| Paper tray media weight | 60 - 220 g/m² |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B4, B5, B6 |
| Maximum ISO A-series paper size | A4 |
Weight and Dimensions| Depth | 504 mm |
|---|---|
| Width | 475 mm |
| Height | 645 mm |
| Weight | 28000 g |
