Ricoh MP 6054 Series User Manual

Entering the Path to the Destination Manually
1. Press [Manual Entry].
2. Press [SMB].
3. Press [Manual Entry] on the right side of the path field.
4. Enter the path for the folder.
In the following example path, the shared folder name is "user" and the computer name is
"desk01":
\\desk01\user
5. Press [OK].
6. Depending on the destination setting, enter the user name for logging in to the computer.
Press [Manual Entry] to the right of the user name field to display the soft keyboard.
7. Depending on the destination setting, enter the password for logging in to the computer.
Press [Manual Entry] for the password to display the soft keyboard.
8. Press [Connection Test].
A connection test is performed to check whether the specified shared folder exists.
9. Check the connection test result, and then press [Exit].
10. Press [OK].
Basic Procedure When Using Scan to Folder
141

Ricoh MP 6054 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Print Speed	60 ppm (B&W)
Paper Capacity	Maximum 4, 700 sheets
Scan Resolution	600 x 600 dpi
Standard Connectivity	USB, Ethernet
Fax Speed	33.6 kbps
Control Panel	10.1" Smart Operation Panel