No. Icon Description
14
Press to add a destination.
Destinations can be added as follows:
• Input destinations manually
• Select from the transmission history
• Specify a registration number from the
Address Book
• Search for a destination in the Address Book
or on the LDAP server
• Press to display the Remaining Memory
Information
[Settings] screen
You can switch the three screens described in this section by flicking the screen up or down.
The items on the screen vary depending on the machine's settings.
No. Icon Description
1
You can switch to immediate transmission mode.
Unless immediate transmission is selected, memory
transmission mode is selected by default.
2
You can select an original type that is suitable for
your originals.
2. Getting Started
46
To Next Page
Loading...
