Ricoh MP C4503 Administrator's Guide

Category Item Settings
Fax IP-Fax Settings
Enable H.323
[Off]
Fax IP-Fax Settings
Enable SIP
[Off]
Fax Parameter Settings
LAN-Fax Result Report
[Off]
4. Specifying [Interface]
The administrator must specify the settings in [Interface] within the ranges shown in the following table.
Category Item Settings
Interface Interface Settings
USB
[Inactive]
5. Specifying [Network]
The administrator must specify the settings in [Network] within the ranges shown in the following table.
Category Item Settings
Network IPv4
LLMNR
[Inactive]
6. Specifying [Security]
The administrator must specify the settings in [Security] within the ranges shown in the following table.
• If "Network Security" "Security Level" is set to [FIPS 140], some functions become unavailable.
For details about the functions that become unavailable, see "Status of Functions under Each
Network Security Level" and "Enabling and Disabling Protocols" in the Security Guide.
• If the FTP or SNMP function is set to [Inactive], some functions become unavailable. For details
about the functions that become unavailable, see "Enabling and Disabling Protocols" in the Security
Guide.
Preparation for Use
23

Ricoh MP C4503 Specifications

General

Print Speed	45 ppm
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Type	Color Laser Multifunction Printer
Copy Speed	45 cpm
Fax Resolution	200 x 200 dpi
Duplex Printing	Yes
Monthly Duty Cycle	200, 000 pages
Standard Connectivity	USB, Ethernet
Paper Size	A3, A4, A5, B4, B5
Scan Resolution	Up to 600 dpi
Fax Speed	33.6 kbps
Memory	1.5 GB