Ricoh MP C4504 series User Manual

17. Check that [SMB] is selected.
18. Press [Change] or [Browse Network], and then specify the folder.
To specify a folder, you can either enter the path manually or locate the folder by browsing the
network.
19. Press [Connection Test] to check the path is set correctly.
20. Press [Exit].
If the connection test fails, check the settings, and then try again.
21. Press [OK].
22. Press [User Tools] (
) on the top right of the screen.
23. Press [Home] ( ) at the bottom of the screen in the center.
Locating the SMB folder manually
1. Press [Change] under "Path".
2. Enter the path where the folder is located.
For example: if the name of the destination computer is "User", and the folder name is "Share", the
path will be \\User\Share.
Basic Procedure When Using Scan to Folder
137

Ricoh MP C4504 series Specifications

General

Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Fax Resolution	200 x 200 dpi
Duplex Printing	Yes
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive
Connectivity	USB, Ethernet
Mobile Printing	Yes, supports AirPrint, Mopria, Google Cloud Print
Control Panel	10.1-inch color touchscreen
Print Speed	45 pages per minute