Ricoh MP C5503 Administrator's Guide

Category Item Settings
Security Device Certificate
Certificate 1
Request
Configure this to create the request form
for the certificate authority to issue the
device certificate.
If you are using a self-signed device
certificate, you do not need to configure
this setting.
Of the settings for the device certificate
(certificate issued by the certificate
authority), set "Algorithm Signature" to
one of the following:
• sha512WithRSA-4096
• sha512WithRSA-2048
• sha256WithRSA-4096
• sha256WithRSA-2048
• sha1WithRSA-2048
• sha1WithRSA-1024
Submit the application form to request
that the certificate authority issue the
device certificate.
The request method depends on the
certificate authority. For details, contact
the certificate authority.
You can install the certificate issued by
the certificate authority via Web Image
Monitor.
Security Device Certificate Install To use the device certificate (issued by
the certificate authority), install the
certificate by configuring this setting.
If using the intermediate certificate as
well, install that too.
Security Device Certificate
Install Intermediate
Certificate
When using an intermediate certificate,
configure this setting to install the
certificate.
Preparation for Use
25

Ricoh MP C5503 Specifications

General

Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Paper Capacity	Standard: 1, 200 sheets, Maximum: 4, 700 sheets
Monthly Duty Cycle	300, 000 pages
Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Duplex Printing	Yes
Automatic Document Feeder (ADF)	Yes
ADF Capacity	100 sheets
Mobile Printing Support	Yes
Print Speed	55 ppm
Fax Resolution	200 x 200 dpi
Connectivity	USB, Ethernet
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter
Scan Speed	80 ipm