Ricoh MP C5503 Administrator's Guide

Tab Item Settings
Administrator Tools Extended Security
Password Policy
Set "Complexity Setting" to [Level 1] or
[Level 2], press [Change] on the right
of "Minimum Character No.", and then
set the number of characters to 8 or
more.
For example, to set the number of
characters to 8, press the number key
"8", and then "#".
Even if you change the password
policy, passwords that have already
been registered can still be used. The
changed password policy will be
applied only to passwords specified or
changed subsequently.
Administrator Tools Auto Erase Memory
Setting
Select [On], and then select [NSA],
[DoD], or [Random Numbers].
If you set this to [Random Numbers],
set [Number of Erase] to three or more.
4. Changing [Scanner Features] Using the Control Panel
Tab Item Settings
General Settings Print & Delete Scanner
Journal
[Do not Print: Delete Oldest] or [Do not
Print: Disable Send]
5. Changing [Device Settings] via Web Image Monitor
Category Item Settings
Device Settings Date/Time
Set Date
Set the appropriate date.
Device Settings Date/Time
Set Time
Set the appropriate time.
Device Settings Date/Time
Time Zone
Set the appropriate time zone.
Changing MFP Settings During Operation
35

Ricoh MP C5503 Specifications

General

Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Paper Capacity	Standard: 1, 200 sheets, Maximum: 4, 700 sheets
Monthly Duty Cycle	300, 000 pages
Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Duplex Printing	Yes
Automatic Document Feeder (ADF)	Yes
ADF Capacity	100 sheets
Mobile Printing Support	Yes
Print Speed	55 ppm
Fax Resolution	200 x 200 dpi
Connectivity	USB, Ethernet
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter
Scan Speed	80 ipm