Ricoh MP C5503 User Manual

Message Causes Solutions
"Connection with the remote
machine has failed. There is
a problem with the remote
machine structure. Contact
the administrator."
The settings or machine
configuration for using the
remote fax function to
connect to the main machine
are incorrect.
For details about the settings and
machine configuration for using the
remote fax function to connect to a
main machine, contact your
administrator.
"Transfer error has occured.
Check the status of the
remote machine."
A network error occurred
during transfer.
• Check that the correct IP address
or host name is set for the main
machine in [System Settings]. For
details about these settings,
contact your administrator.
• Check that the main machine is
working correctly.
• Check that the LAN cable is
correctly connected to the
machine.
• For details about transmission,
contact your administrator.
"The HDD of the remote
machine is full."
The hard disk became full
after using the remote fax
function to scan an original.
Delete unnecessary files.
Messages Displayed When Using the Facsimile Function
187

Ricoh MP C5503 Specifications

General

Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Paper Capacity	Standard: 1, 200 sheets, Maximum: 4, 700 sheets
Monthly Duty Cycle	300, 000 pages
Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Duplex Printing	Yes
Automatic Document Feeder (ADF)	Yes
ADF Capacity	100 sheets
Mobile Printing Support	Yes
Print Speed	55 ppm
Fax Resolution	200 x 200 dpi
Connectivity	USB, Ethernet
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter
Scan Speed	80 ipm