Ricoh MP C6004 series User Manual

5. Press [Custom Size].
If a custom size is already specified, press [Change Size].
6. Press [Vertical].
7. Enter the vertical size using the number keys, and then press [ ].
8. Press [Horizontal].
9. Enter the horizontal size using the number keys, and then press [ ].
10. Press [OK] twice.
11. Press [User Tools] ( ) on the top right of the screen.
12. Press [Home] ( ) at the bottom of the screen in the center.
Specifying thick paper, thin paper, or OHP transparencies for paper type using the
control panel
• Use A4 or 8
1
/
2
× 11 size OHP transparencies, and specify their size.
• Usually only one side of OHP transparencies can be used for printing. Be sure to load them with the
print side down.
• When printing onto OHP transparencies, remove printed sheets one by one.
1. Press [Home] ( ) at the bottom of the screen in the center.
2. Flick the screen to the left, and then press the [User Tools] icon ( ).
3. Press [Tray Paper Settings].
4. Press [Printer Bypass Paper Size], and then specify the paper size.
5. Press [OK].
6. Press [ Next].
7. Press [Paper Type: Bypass Tray].
Loading Paper
161

Ricoh MP C6004 series Specifications

General

Print Speed (Black)	60 ppm
Print Speed (Color)	60 ppm
Print Resolution	1200 x 1200 dpi
Copy Speed (Black)	60 ppm
Copy Speed (Color)	60 ppm
Copy Resolution	600 x 600 dpi
Fax Resolution	200 x 200 dpi
Duplex Printing	Yes
Automatic Document Feeder (ADF)	Yes
ADF Capacity	100 sheets
Memory (RAM)	2 GB
Hard Disk Drive	320 GB
Type	All in One Printer
Scan Resolution	600 dpi
Paper Capacity	4, 700 sheets
Standard Paper Capacity	1, 200 sheets
First Print Time (Color)	5.5 seconds
Connectivity	USB, Ethernet
PDL	PCL 5c, PCL 6, PostScript 3