Ricoh MP C6004 series User Manual

Message Cause Solution
"I/O buffer overflow." An input buffer overflow
occurred.
• In [Printer Features], under [Host
Interface], select [I/O Buffer],
and then set the maximum buffer
size to a larger value.
• Reduce the number of files being
sent to the machine.
"Insufficient Memory" A memory allocation error
occurred.
PCL 6
On the printer driver's [Detailed
Settings] tab, click [Print
Quality:Advanced] in "Menu:",
and then select [Raster] in the
"Vector/Raster:" list. In some
cases, it will take a long time to
complete a print job.
"Memory Retrieval Error" A memory allocation error
occurred.
Turn off the power and then back on
again. If the message appears again,
replace the RAM. For details about
replacing the RAM, contact your
service representative.
If printing does not start, contact your service representative.
• The contents of errors may be printed on the Configuration Page. Check the Configuration Page in
conjunction with the error log. For details about how to print the Configuration Page, see "List / Test
Print", Print.
10. Troubleshooting
222

Ricoh MP C6004 series Specifications

General

Print Speed (Black)	60 ppm
Print Speed (Color)	60 ppm
Print Resolution	1200 x 1200 dpi
Copy Speed (Black)	60 ppm
Copy Speed (Color)	60 ppm
Copy Resolution	600 x 600 dpi
Fax Resolution	200 x 200 dpi
Duplex Printing	Yes
Automatic Document Feeder (ADF)	Yes
ADF Capacity	100 sheets
Memory (RAM)	2 GB
Hard Disk Drive	320 GB
Type	All in One Printer
Scan Resolution	600 dpi
Paper Capacity	4, 700 sheets
Standard Paper Capacity	1, 200 sheets
First Print Time (Color)	5.5 seconds
Connectivity	USB, Ethernet
PDL	PCL 5c, PCL 6, PostScript 3