Ricoh MP C6502SP - Page 102

002
GREEN *ENG
[0 or 1 / 0 / 1/step]
0:FL Correction OFF
1:FL Correction ON
Switch/Saves ON/OFF of SBU datas (GREEN) FL Correction.
With switching ON this SP, when center border area of main scan in image has density
left/right difference, reduces it
Value adjusted during warranty process of scanner unit is set.
003
BLUE *ENG [0 or 1 / 0 / 1/step]
Switch/Saves ON/OFF of SBU datas (BLUE) FL Correction.
With switching ON this SP, when center border area of main scan in image has density
left/right difference, reduces it
Value adjusted during warranty process of scanner unit is set.
4501 [ACC Target Den]
001
Copy:K:Text *ENG [0 to 10 / 5 / 1/step]
Sets target value for copy AAC of Text part (edge) Black plate.
002
Copy:C:Text *ENG [0 to 10 / 5 / 1/step]
Sets target value for copy AAC of Text part (edge) Cyan plate.
003
Copy:M:Text *ENG [0 to 10 / 5 / 1/step]
Sets target value for copy AAC of Text part (edge) Magenta plate.
004
Copy:Y:Text *ENG [0 to 10 / 5 / 1/step]
Sets target value for copy AAC of Text part (edge) Yellow plate.
005
Copy:K:Photo *ENG [0 to 10 / 5 / 1/step]
Sets target value for copy AAC of Photo part (non-edge) Black plate.
006
Copy:C:Photo *ENG [0 to 10 / 5 / 1/step]
Sets target value for copy AAC of Photo part (non-edge) Cyan plate.
007
Copy:M:Photo *ENG [0 to 10 / 5 / 1/step]
Sets target value for copy AAC of Photo part (non-edge) Magenta plate.
2. Main SP Tables-4
100