1 256-Gradation main scan A 6 Argyle pattern D
2 Patch 16C 7 Scanned+Slant Grid C
3 Grid pattern A 8 Scanned+Slant Grid D
4 Argyle pattern B - -
4429 [Select Copy Data Security]
001
Copying *ENG [0 to 3 / 3 / 1/step]
Sets illegal copy output pattern density for copy. Larger value; the darker.
002
Scanning *ENG [0 to 3 / 3 / 1/step]
Sets illegal copy output pattern density for scan. Larger value; the darker.
003
Fax Operation *ENG [0 to 3 / 3 / 1/step]
Sets illegal copy output pattern density for fax. Larger value; the darker.
4460 [Digital AE]
001
Low Limit Value *ENG [0 to 1023 / 364 / 1/step]
Set min. threshold for detecting background when scanning.
If input image data is brighter than this (larger value), decides area as back ground.
002
Background Erase Level *ENG [512 to 1535 / 932 / 1/step]
Sets background level for output value for background erase when scanning. Larger value;
the brighter.
4490 [FL Correction ON/OFF]
001
RED *ENG
[0 or 1 / 0 / 1/step]
0:FL Correction OFF
1:FL Correction ON
Switch/Saves ON/OFF of SBU datas (RED) FL Correction.
With switching ON this SP, when center border area of main scan in image has density
left/right difference, reduces it
Value adjusted during warranty process of scanner unit is set.
SP4-XXX (Scanner)
99
To Next Page
Loading...
