Ricoh MP C6502SP - Page 100

4351 [Intermittent Shading : FC]
001
Switch On/Off ENG
[0 or 1 / 1 / 1/step]
1: Intermittent Shading ON
0: Intermittent Shading OFF(Shad
every time)
Switches On/OFF for Intermittent Shading when scanning FC (Simplex/Duplex).
4400 [Org Edge Mask]
001
Book:Sub LEdge ENG [0.0 to 3.0 / 0.0 / 0.1 mm/step]
Sets mask for original shadow edge 0.1mm per step.
002
Book:Sub TEdge ENG [0.0 to 3.0 / 0.0 / 0.1 mm/step]
Sets mask for original shadow edge 0.1mm per step.
003
Book:Main:LEdge ENG [0.0 to 3.0 / 0.0 / 0.1 mm/step]
Sets mask for original shadow edge 0.1mm per step.
004
Book:Main:Tedge ENG [0.0 to 3.0 / 0.0 / 0.1 mm/step]
Sets mask for original shadow edge 0.1mm per step.
005
ADF: Leading Edge *ENG [0.0 to 3.0 / 0.0 / 0.1 mm/step]
Sets mask area for erasing original shadow at sub scan front edge when using ADF.
007
ADF: Right *ENG [0.0 to 3.0 / 0.0 / 0.1 mm/step]
Sets mask area for erasing original shadow at main scan front edge when using ADF.
008
ADF: left *ENG [0.0 to 3.0 / 0.0 / 0.1 mm/step]
Sets mask area for erasing original shadow at main scan back edge when using ADF.
4417 [IPU Test Pattern]
001
Test Pattern ENG [0 to 8 / 0 / 1/step]
Selects test pattern that is mount with IPU ASIC.
0 Scanned image 5 Argyle pattern C
2. Main SP Tables-4
98