Ricoh MP C6502SP - Page 125

005
Latest:F:BE ENG [-31 to 31 / 0 / 1digit/step]
Displays SSCG analog correction value (F Side/BLUE/EVEN pixel).
Adjustment will be done when scanner turns on.
Use for design evaluation, analyzing malfunction (abnormal images).
006
Latest:F:BO ENG [-31 to 31 / 0 / 1digit/step]
Displays SSCG analog correction value (F Side/BLUE/ODD pixel).
Adjustment will be done when scanner turns on.
Use for design evaluation, analyzing malfunction (abnormal images).
007
Latest:L:RE ENG [-31 to 31 / 0 / 1digit/step]
Displays SSCG analog correction value (L Side/RED/EVEN pixel).
Adjustment will be done when scanner turns on.
Use for design evaluation, analyzing malfunction (abnormal images).
008
Latest:L:RO ENG [-31 to 31 / 0 / 1digit/step]
Displays SSCG analog correction value (L Side/RED/ODD pixel).
Adjustment will be done when scanner turns on.
Use for design evaluation, analyzing malfunction (abnormal images).
009
Latest:L:GE ENG [-31 to 31 / 0 / 1digit/step]
Displays SSCG analog correction value (L Side/GREEN/EVEN pixel).
Adjustment will be done when scanner turns on.
Use for design evaluation, analyzing malfunction (abnormal images).
010
Latest:L:GO ENG [-31 to 31 / 0 / 1digit/step]
Displays SSCG analog correction value (L Side/GREEN/ODD pixel).
Adjustment will be done when scanner turns on.
Use for design evaluation, analyzing malfunction (abnormal images).
011
Latest:L:BE ENG [-31 to 31 / 0 / 1digit/step]
Displays SSCG analog correction value (L Side/BLUE/EVEN pixel).
Adjustment will be done when scanner turns on.
Use for design evaluation, analyzing malfunction (abnormal images).
SP4-XXX (Scanner)
123