Ricoh MP C6502SP - Page 129

008
Factory :L:RO *ENG [-31 to 31 / 0 / 1digit/step]
Display/Saves Factory SSCG Analog correction value (L Side/RED/ODD pixel).
Adjusted SSCG correction Value during the main unit warranty process is saved.
Use for analyzing malfunction, comparing factory / current value.
009
Factory :L:GE *ENG [-31 to 31 / 0 / 1digit/step]
Display/Saves Factory SSCG Analog correction value (L Side/GREEN/EVEN pixel).
Adjusted SSCG correction Value during the main unit warranty process is saved.
Use for analyzing malfunction, comparing factory / current value.
010
Factory :L:GO *ENG [-31 to 31 / 0 / 1digit/step]
Display/Saves Factory SSCG Analog correction value (L Side/GREEN/ODD pixel).
Adjusted SSCG correction Value during the main unit warranty process is saved.
Use for analyzing malfunction, comparing factory / current value.
011
Factory :L:BE *ENG [-31 to 31 / 0 / 1digit/step]
Display/Saves Factory SSCG Analog correction value (L Side/BLUE/EVEN pixel).
Adjusted SSCG correction Value during the main unit warranty process is saved.
Use for analyzing malfunction, comparing factory / current value.
012
Factory :L:BO *ENG [-31 to 31 / 0 / 1digit/step]
Display/Saves Factory SSCG Analog correction value (L Side/BLUE/ODD pixel).
Adjusted SSCG correction Value during the main unit warranty process is saved.
Use for analyzing malfunction, comparing factory / current value.
4640 [SSCG Noise Cancel (Digital)]
001
Factory :F:RE ENG [-255 to 255 / 0 / 1digit/step]
Display/Saves Factory SSCG Digital correction value (F Side/RED/EVEN pixel).
Adjusted SSCG correction Value during the main unit warranty process is saved.
Use for analyzing malfunction, comparing factory / current value.
SP4-XXX (Scanner)
127