Ricoh MP C6502SP - Page 131

009
Factory :L:GE ENG [-255 to 255 / 0 / 1digit/step]
Display/Saves Factory SSCG Digital correction value (L Side/GREEN/EVEN pixel).
Adjusted SSCG correction Value during the main unit warranty process is saved.
Use for analyzing malfunction, comparing factory / current value.
010
Factory :L:GO ENG [-255 to 255 / 0 / 1digit/step]
Display/Saves Factory SSCG Digital correction value (L Side/GREEN/ODD pixel).
Adjusted SSCG correction Value during the main unit warranty process is saved.
Use for analyzing malfunction, comparing factory / current value.
011
Factory :L:BE ENG [-255 to 255 / 0 / 1digit/step]
Display/Saves Factory SSCG Digital correction value (L Side/BLUE/EVEN pixel).
Adjusted SSCG correction Value during the main unit warranty process is saved.
Use for analyzing malfunction, comparing factory / current value.
012
Factory :L:BO ENG [-255 to 255 / 0 / 1digit/step]
Display/Saves Factory SSCG Digital correction value (L Side/BLUE/ODD pixel).
Adjusted SSCG correction Value during the main unit warranty process is saved.
Use for analyzing malfunction, comparing factory / current value.
4641 [SSCG Noise Amplitude]
001
F:RE ENG [0 to 1023 / 0 / 1digit/step]
Displays SSCG Nose Amplitude (F Side/RED/EVEN pixel) when adjusting SSCG.
Correction value will be decided depending on detected Noise Amplitude when adjusting.
Adjustment will be done when scanner turns on.
Use for design evaluation, analyzing malfunction (abnormal images).
002
F:RO ENG [0 to 1023 / 0 / 1digit/step]
Displays SSCG Nose Amplitude (F Side/RED/ODD pixel) when adjusting SSCG.
Correction value will be decided depending on detected Noise Amplitude when adjusting.
Adjustment will be done when scanner turns on.
Use for design evaluation, analyzing malfunction (abnormal images).
SP4-XXX (Scanner)
129