Ricoh MP C6502SP - Page 132

003
L:RE ENG [0 to 1023 / 0 / 1digit/step]
Displays SSCG Nose Amplitude (L Side/RED/EVEN pixel) when adjusting SSCG.
Correction value will be decided depending on detected Noise Amplitude when adjusting.
Adjustment will be done when scanner turns on.
Use for design evaluation, analyzing malfunction (abnormal images).
004
L:RO ENG [0 to 1023 / 0 / 1digit/step]
Displays SSCG Nose Amplitude (L Side/RED/ODD pixel) when adjusting SSCG.
Correction value will be decided depending on detected Noise Amplitude when adjusting.
Adjustment will be done when scanner turns on.
Use for design evaluation, analyzing malfunction (abnormal images).
005
F:GE ENG [0 to 1023 / 0 / 1digit/step]
Displays SSCG Nose Amplitude (F Side/GREEN/EVEN pixel) when adjusting SSCG.
Correction value will be decided depending on detected Noise Amplitude when adjusting.
Adjustment will be done when scanner turns on.
Use for design evaluation, analyzing malfunction (abnormal images).
006
F:GO ENG [0 to 1023 / 0 / 1digit/step]
Displays SSCG Nose Amplitude (F Side/GREEN/ODD pixel) when adjusting SSCG.
Correction value will be decided depending on detected Noise Amplitude when adjusting.
Adjustment will be done when scanner turns on.
Use for design evaluation, analyzing malfunction (abnormal images).
007
L:GE ENG [0 to 1023 / 0 / 1digit/step]
Displays SSCG Nose Amplitude (L Side/GREEN/EVEN pixel) when adjusting SSCG.
Correction value will be decided depending on detected Noise Amplitude when adjusting.
Adjustment will be done when scanner turns on.
Use for design evaluation, analyzing malfunction (abnormal images).
008
L:GO ENG [0 to 1023 / 0 / 1digit/step]
Displays SSCG Nose Amplitude (L Side/GREEN/ODD pixel) when adjusting SSCG.
Correction value will be decided depending on detected Noise Amplitude when adjusting.
Adjustment will be done when scanner turns on.
Use for design evaluation, analyzing malfunction (abnormal images).
2. Main SP Tables-4
130