Ricoh MP C6502SP - Page 324

087
Protocol usage *CTL [0 or 1 / 0x00000000 / 1bit/step]
Shows which protocols have been used with the network.
0: Off (Not used the network with the protocol.)
1: On (Used the network with the protocol once or more.)
bit0: IPsec, bit1: IPv6, bit2: IEEE 802. 1X, bit3:Wireless LAN,
bit4: Security mode level setting, bit5:Appletalk, bit6: DHCP,
bit7: DHCPv6, bit8: telnet, bit9: SSL, bit10: HTTPS,
bit11: BMLinkS printing, bit12: diprint printing, bit13: LPR printing,
bit14: ftp printing, bit15: rsh printing, bit16: SMB printing,
bit17: WSD-Printer, bit18: WSD-Scanner, bit19: Scan to SMB,
bit20: Scan to NCP, bit21: Reserve, bit22: Bluetooth,
bit23: IEEE 1284, bit24: USB printing, bit25: Dynamic DNS,
bit26: Netware printing, bit27: LLTD, bit28: IPP printing,
bit29: IPP printing (SSL), bit30: ssh, bit31: sftp
090
TELNET (0: OFF 1: ON) *CTL
[0 or 1 / 1 / 1/step]
0: Disable
1: Enable
Enables or disables the Telnet protocol.
091
Web (0: OFF 1: ON) *CTL
[0 or 1 / 1 / 1/step]
0: Disable, 1: Enable
Enables or disables the Web operation.
145
Active IPv6 Link Local Address CTL
[00000000000000000000000000000000
0000h to
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF80h /
000000000000000000000000000000004
0h / -]
This is the IPv6 local address link referenced on the Ethernet or wireless LAN (802.11b) in the
format:
"Link Local Address" + "Prefix Length"
The IPv6 address consists of a total 128 bits configured in 8 blocks of 16 bits each.
3. Main SP Tables-5
322