003
Replacement of Circuit
Classifications
*CTL
[0 to 13 / 1 / 1/step]]
1: G3
2: EXT
3: G3-1
4: G3-1- EXT
5: G3-2
6: G3-2- EXT
7: G3-3
8: G3-3-EXT
9: G3-idle-EXT
10: idle-EXT
11: I-G3
12: I-G3-EXT
13: G4
5851 [Bluetooth]
001 Mode -
[0 or 1 / 0 / 1/step]
0: Public
1: Private
5853
[Stamp Date Download]
Push [Execute] to download the fixed stamp data from the machine ROM onto the hard
disk. Then these stamps can be used by the system. If this is not done, the user will not have
access to the fixed stamps ("Confidential", "Secret", etc.).
You must always execute this SP after replacing the HDD or after formatting the HDD.
Always switch the machine off and on after executing this SP.
001 - CTL [- / - / -]
5856
[Remote ROM Update]
Allows the technician to upgrade the firmware using a local port (IEEE1284) when
updating the remote ROM.
SP5-722 to 998 (Mode)
343
To Next Page
Loading...
