002 Local Port *CTL
[0 or 1 / 0 / 1/step]
0: Disable
1: Enable
5857 [Debug Log Save]
001
Save Debug Log *CTL [0 to 2 / 0 / 1/Step]
Enables log trace function or debug log saving function. The debug log cannot be captured
until this feature is switched on.
•
0: Enables log trace function
• 1: Enables debug log saving function
• 2: OFF
• If “0” is selected, it disables the settings of SP5857-002 to 013 and gives executing
failure. If “1” is selected, it disables ordinarily saving function; however, SP5857-101
to 112 are able to execute.
002
Target (2:HDD 3:SD) *CTL
[ 1 to 3 / 2 / 1/step]
1:IC Card
2: HDD
3: SD Card
Sets the storage location for the debug log.
005
Save to HDD *CTL [-999999 to 9999999 / - / 1/step]
Saves the debug log of the input SC number in memory to the HDD.
A unique file name is generated to avoid overwriting existing file names on the SD Card.
Up to 4MB can be copied to an SD Card. 4 MB segments can be copied one by one to
each SD Card.
006
Save to SD Card *CTL [-999999 to 9999999 / - / 1/step]
Saves the debug log of the input SC number in memory to the SD card.
3. Main SP Tables-5
344
To Next Page
Loading...
