009
Copy HDD to SD Card (Latest
4MB)
*CTL
[- / - / -]
[Execute]
Takes the most recent 4 MB of the log written to the hard disk and copies them to the SD
Card.
A unique file name is generated to avoid overwriting existing file names on the SD Card.
Up to 4MB can be copied to an SD Card. 4 MB segments can be copied one by one to
each SD Card.
010
Copy HDD to SD Card (Latest
4MB Any Key)
*CTL
[- / - / -]
[Execute]
Takes the log of the specified key from the log on the hard disk and copies it to the SD
Card.
A unique file name is generated to avoid overwriting existing file names on the SD Card.
Up to 4 MB can be copied to an SD Card. 4 MB segments can be copied one by one to
each SD Card. This SP does not execute if there is no log on the HDD with no key specified.
011
Erase HDD Debug Data *CTL
[- / - / -]
[Execute]
Erases all debug logs on the HDD
012
Erase SD Card Debug Data *CTL
[- / - / -]
[Execute]
Erases all debug logs on the SD Card. If the card contains only debugging files generated
by an event specified by SP5858, the files are erased when SP5857 010 or 011 is
executed.
To enable this SP, the machine must be cycled off and on.
013
Free Space on SD Card *CTL
[- / - / -]
[Execute]
Displays the amount of space available on the SD card.
014
Copy SD to SD (Latest 4MB) *CTL
[- / - / -]
[Execute]
Copies the most recent 4 MB of the debug log from an SD card to a different SD card.
SP5-722 to 998 (Mode)
345
To Next Page
Loading...
