017
Tray4:2 *ENG [0 or 1 / 0 / 1/step]
Size settings for Tray 4
018
Tray4:3 *ENG [0 or 1 / 0 / 1/step]
Size settings for Tray 4
019
Tray4:4 *ENG [0 or 1 / 0 / 1/step]
Size settings for Tray 4
020
Tray4:5 *ENG [0 or 1 / 0 / 1/step]
Size settings for Tray 4
021
Tray4:6 *ENG [0 or 1 / 0 / 1/step]
Size settings for Tray 4
5960 [A3 Tray Custom Paper Size Set]
001
Width (Main Scan) *ENG [210 to 205 / 297/ 1/step]
Settings for Main Scan Custom Paper size for A3 Extension Tray.
* Since only millimeter [mm] is available on this SP, convert the inch-based data/originals
to [mm] as below:
A inch * 25.4 = B mm
002
Length (Sub Scan) *ENG [210 to 439 / 210/ 1/step]
Settings for Sub Scan Custom Paper size for A3 Extension Tray.
* Since only millimeter [mm] is available on this SP, convert the inch-based data/originals
to [mm] as below:
A inch * 25.4 = B mm
5967
[Copy Server: Set Function]
Enables and disables the document server. This is a security measure that prevents image
data from being left in the temporary area of the HDD. After changing this setting, you must
switch the main switch off and on to enable the new setting.
SP5-722 to 998 (Mode)
357
To Next Page
Loading...
Need help?
General