Ricoh MP C6502SP - Page 366

003
Hinge Open Counter Clear ENG
[- / - / -]
[Execute]
SP6-030-001: Resets the counter for opening and closing of DF hinge part.
6100
[Sub-scanPunchPosAdj:2K/3K FIN]
Adjusts the position for Length (Sub Scan) for Punch.
•
Adjustment Value "-": Whole position shifts to the direction of the paper trailing edge
when accepted.
• Adjustment Value "+": Whole position shifts to the direction of the paper leading edge
when accepted.
001 Domestic 2Hole(Europe 2Hole) *ENG
[-7.5 to 7.5 / 0.0 / 0.1mm/step]
002 3-Hole: NA *ENG
003 4-Hole: EU *ENG
004 5-Hole: SCAN *ENG
005 2-Hole: NA *ENG
6101
[Main-scanPunchPosAdj:2K/3K FIN]
Adjusts the position for Length (Main Scan) for Punch.
• Adjustment Value "-": Whole position shifts to the front of the machine.
• Adjustment Value "+": Whole position shifts to the rear of the machine.
001 Domestic 2Hole(Europe 2Hole) *ENG
[-2.0 to 2.0 / 0.0 / 0.1mm/step]
002 3-Hole: NA *ENG
003 4-Hole: EU *ENG
004 5-Hole: SCAN *ENG
005 2-Hole: NA *ENG
4. Main SP Tables-6
364