Ricoh MP C6502SP - Page 400

6320
[FM5 4ths "V": Fine Adjust 2nd]
Adjusts End2 (S2) position when folding with Double Parallel Fold by using Folding Unit.
[+] makes (S2) large and [-] makes (S2) small.
The top right illustration shows the status that Double Parallel Fold is opened and the bottom
right one shows that Double Parallel Fold is not opened.
The cercle is the leading edge of paper, and the dot is the trailing edge of paper.
paper feeding direction
* Only enabled when Custom Paper is not being used in Pro machine.
001 A3 SEF ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
002 B4 SEF ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
003 A4 SEF ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
004 DLT SEF ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
005 LG SEF ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
006 LT SEF ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
007 12"*18" ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
008 8-kai ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
009 B5T ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
019 Other ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
4. Main SP Tables-6
398