Ricoh MP C6502SP - Page 401

6321
[FM6 4ths 2 Flap:Fine Adj 1st]
Adjusts End (S1) position when folding with Gate Fold by using Folding Unit.
[+] makes (S1) large and [-] makes (S1) small.
The top right illustration shows the status that Gate Fold is opened and the bottom right one
shows that Gate Fold is not opened.
The cercle is the leading edge of paper, and the dot is the trailing edge of paper.
paper feeding direction
* Only enabled when Custom Paper is not being used in Pro machine.
001 A3 SEF ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
002 B4 SEF ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
003 A4 SEF ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
004 DLT SEF ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
005 LG SEF ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
006 LT SEF ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
007 8-kai ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
008 B5T ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
009 Other ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
019 A3 SEF ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
SP6-XXX (Peripherals)
399