6323
[FM6 4ths 2 Flap:Fine Adj 3rd]
Adjusts Center (S3) position when folding with Gate Fold by using Folding Unit.
[+] makes (S3) large and [-] makes (S3) small.
The top right illustration shows the status that Gate Fold is opened and the bottom right one
shows that Gate Fold is not opened.
The cercle is the leading edge of paper, and the dot is the trailing edge of paper.
paper feeding direction
* Only enabled when Custom Paper is not being used in Pro machine.
001 A3 SEF ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
002 B4 SEF ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
003 A4 SEF ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
004 DLT SEF ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
005 LG SEF ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
006 LT SEF ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
007 12"*18" ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
008 8-kai ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
009 B5T ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
019 Other ENG [-4.0 to 4.0 / 0.0 / 0.2mm/step]
6324
[Jogger Fence Position Adjust]
Adjusts landscape Jog position against papers when folding with Multi Sheet by using
Folding Unit.
Adjustment direction
To the standard Jogger width, "+" is the direction that Jogger width becomes wide and "-" is
the direction that Jogger width becomes narrow.
Standard Jogger width: The position with a distance of 1.5mm from the paper end
SP6-XXX (Peripherals)
401
To Next Page
Loading...
