001 A3 SEF ENG [-2.0 to 2.0 / 0.0 / 0.5mm/step]
002 B4 SEF ENG [-2.0 to 2.0 / 0.0 / 0.5mm/step]
003 A4 SEF ENG [-2.0 to 2.0 / 0.0 / 0.5mm/step]
004 DLT SEF ENG [-2.0 to 2.0 / 0.0 / 0.5mm/step]
005 LG SEF ENG [-2.0 to 2.0 / 0.0 / 0.5mm/step]
006 LT SEF ENG [-2.0 to 2.0 / 0.0 / 0.5mm/step]
007 12"*18" ENG [-2.0 to 2.0 / 0.0 / 0.5mm/step]
008 8-Kai ENG [-2.0 to 2.0 / 0.0 / 0.5mm/step]
009 B5T ENG [-2.0 to 2.0 / 0.0 / 0.5mm/step]
019 Other ENG [-2.0 to 2.0 / 0.0 / 0.5mm/step]
6325
[Registration Buckle Adjust]
Adjusts Buckle for Registration Correction when folding with Single Sheet by using Folding
Unit.
This setting can only be enabled when [Buckle Control ON] is set in [SP6-326-001:
Registration Correction Buckle Selection Multi Folder].
Adjustment direction
To the standard Buckle amount, "+" is the direction that Buckle amount increases and "-" is
the direction that that Buckle amount decreases.
Standard Buckle amount: 5mm
001 A3 SEF ENG [-4 to 2 / 0 / 1mm/step]
002 B4 SEF ENG [-4 to 2 / 0 / 1mm/step]
003 A4 SEF ENG [-4 to 2 / 0 / 1mm/step]
004 DLT SEF ENG [-4 to 2 / 0 / 1mm/step]
005 LG SEF ENG [-4 to 2 / 0 / 1mm/step]
006 LT SEF ENG [-4 to 2 / 0 / 1mm/step]
007 12"*18" ENG [-4 to 2 / 0 / 1mm/step]
008 8-Kai ENG [-4 to 2 / 0 / 1mm/step]
4. Main SP Tables-6
402
To Next Page
Loading...
