Ricoh MP C6502SP System Maintenance

O:
Other applications
(external network
applications, for
example)
Refers to network applications such as Web Image
Monitor. Utilities developed with the SDK (Software
Development Kit) will also be counted with this group in the
future.
The Group 8 SP codes are limited to 17 characters, forced by the necessity of displaying them on the
small LCDs of printers and faxes that also use these SPs. Read over the list of abbreviations below and
refer to it again if you see the name of an SP that you do not understand.
• All of the Group 8 SPs are able to reset by “SP5 801 1 Memory All Clear”.
8001
[T:Total Jobs] *CTL
These SPs count the number of times each
application is used to do a job.
[0 to 99999999 / - / 1]
Note: The L: counter is the total number of
times the other applications are used to send
a job to the document server, plus the
number of times a file already on the
document server is used.
8002 [C:Total Jobs] *CTL
8003 [F:Total Jobs] *CTL
8004 [P:Total Jobs] *CTL
8005 [S:Total Jobs] *CTL
8006 [L:Total Jobs] *CTL
• These SPs reveal the number of times an application is used, not the number of pages processed.
•
When an application is opened for image input or output, this counts as one job.
• Interrupted jobs (paper jams, etc.) are counted, even though they do not finish.
• Only jobs executed by the customer are counted. Jobs executed by the customer engineer using
the SP modes are not counted.
• When using secure printing (when a password is required to start the print job), the job is counted
at the time when either "Delete Data" or "Specify Output" is specified.
• A job is counted as a fax job when the job is stored for sending.
• When a fax is received to fax memory, the F: counter increments but the L: counter does not (the
document server is not used).
• A fax broadcast counts as one job for the F: counter (the fax destinations in the broadcast are not
counted separately).
• A fax broadcast is counted only after all the faxes have been sent to their destinations. If one
transmission generates an error, then the broadcast will not be counted until the transmission has
been completed.
• A printed fax report counts as one job for the F: counter.
SP8-XXX (Data Log 2)
617

Ricoh MP C6502SP Specifications

General

Brand	Ricoh
Model	MP C6502SP
Category	Printer
Language	English