Ricoh MP CW2201sp - Specifying Custom Cut Paper Size

CIP Training MP CW2201SP
Input
5. Select the paper size.
6. Press [OK].
7. Press [User Tools] (
) on the top right of the screen.
8. Press [Home] (
) at the bottom of the screen in the center.
Specifying a custom size of cut paper using the control panel
1. Press [Home] ( ) at the bottom of the screen in the center.
2. Flick the screen to the left, and then press the [User Tools] icon ( ).
3. Press [Tray Paper Settings].
4. Press [Printer Bypass Paper Size].
5. Press [Custom Size].
If a custom size is already specified, press [Change Size].
6. Press [Vertical].
7. Enter the vertical size of the paper using the number keys, and then press [
].
8. Press [Horizontal].
9. Enter the horizontal size of the paper using the number keys, and then press [
].
10. Press [OK] twice.
11. Press [User Tools] (
) on the top right of the screen.
Loading Paper