Ricoh MP CW2201sp - Specifying Paper Type

CIP Training MP CW2201SP
Input
12. Press [Home] ( ) at the bottom of the screen in the center.
Specifying paper type using the control panel
1. Press [Home] ( ) at the bottom of the screen in the center.
2. Flick the screen to the left, and then press the [User Tools] icon (
).
3. Press [Tray Paper Settings].
4. Press [
Next].
5. Press [Paper Type: Paper Bypass].
6. Select the proper items, according to the paper type and thickness you want to use.
7. Press [OK].
8. Press [User Tools] ( ) on the top right of the screen.
9. Press [Home] (
) at the bottom of the screen in the center.
8. Adding Paper and Ink