6
OP-P1/MF1 Training
Slide 6
Appearance – OP-MF1 (3-in-1 Model)
OP-MF1au (M134, M147, M165)
OP-MF1aun (M142)
OP-MF1a (M191)
OP-MF1an (M148, M166)
OP-MF1a: Copier + Printer + Scanner + ADF
OP-MF1au: Copier + Printer + Scanner, No ADF
OP-MF1aun: OP-MF1 au + Ethernet
OP-MF1an: OP-MF1 au + Ethernet + ADF
M147, M148 (Europe/N. America models): In these models, the AIO cannot be
refilled with toner.
The 3-in-1 model has a larger operation panel than OP-P1, with more buttons and
a 2-digit display. The top of the machine is covered by a platen cover and flatbed
scanner unit, except for the M148, M166, and M191, which have an ADF instead
of a platen cover. The M148, M166, and M191 also have a larger operation panel,
almost the same as the 4-in-1 model, but without the fax functions.
Use Smart Organizing Monitor to make machine settings, monitor the error
codes, and execute other functions
The functions that can be performed with Smart Organizing Monitor are
explained in the service manual (Troubleshooting > Utilities).
The ADF can hold and feed 15 originals for continuous scanning.
To Next Page
Loading...
