72
OP-P1/MF1 Training
Slide 72
Safety Switches
Safety switches are installed on the front and the rear. They are
turned On/Off when each cover (front or rear) are opened or
closed.
Front door switch: Turned on and off when the front cover is
opened or closed.
» North America models have two switches. Models for other regions
have one.
Interlock switch (fusing unit cover): Turned on/off by the straight
guide plate which is pushed by the arm.
When the cover opens, power supply to the laser unit is cut to
secure safety during maintenance and jammed paper removal.
AArm
B Straight Guide Plate
C Left Side Plate
D Interlock SW (Fusing Unit Cover)
F Front Door SW
GFront Cover
To Next Page
Loading...
